tomcctv

Hi why are you looking at a reset ? what make is the dvr …… it’s a old one

Hi. You will be limited to finding a camera to fit in a 10 year old housing how many cameras do you have on this system ….is it for commercial or home use

Yes you can use pss if on same network and pic file type before downloading or keep it simple ….. like I said … forget what you have done in the past On recorder >backup>top right > file type> change to what format you want

hi hi this post is also yours from a hour or so

Hi 568a is not normal B is the standard so you now have 1 end A and other B so can’t transmit both ends should be T-568-B

Hi for only 15m I would just run a 0.75 cable as well for power your link only uses 1 pair for power which can give you problems

We use these … link below problem using separate supplies one Poe for cameras and one to power nvr or pc …. It can take a long time for startup plus nothing for router for alerts these are good …. Just plug Poe nvr into it …. Less to fail plus you can power your router https://1va.co.uk/entry-level-ups-systems-c-1.html?ceid=f446905c28def4ea070ec45e2720af20

Ok so why not just backup nvr ? If it is Poe

We have moved on since the 90s why would anyone connect to your service not knowing who is watching

Hi. It depends on your other equipment if it’s worth it battery Poe backup is ok but only if rest of equipment is protected no point cameras on and recording not are you running pc or nvr

Hi. First I would check the power supply what type do you have and what amp also type of cable used

Hi. Your first problem is ….. you need to forget anything you did in the past you have a new nvr …. That should play your files without converting…. So you must be also downloading your files wrong what make is your nvr and also what app does it use

Ok how did you change your pc IP address ?

Ok. So you have more than one camera and connected to a nvr. this goes back to using the local iP of the camera ….. and it is not 192.168.1.251 this is assigned because all your cameras have the same settings under 192.168.0.1 you need to alter each camera and give them different IP address the only way of doing this is remove all cameras from nvr and connect them to a pc off your local network …. Your pc needs to be matching the iP cameras IP address 192.168.0.x and not 192.168.1.x or you can’t alter settings or use a net analyzer To alter your cameras

Ok I think your looking at everything wrong yes your camera has a static iP (local) it needs that to work are you looking for viewing remotely? this will involve you setting up port forwarding with your cameras static IP

Hi how far did you get before taking camera apart ? your link to iP config has nothing to do with it how far did you get with the local network connection

Hi can you post which camera from uk …. send it to pm and if it’s compatible then I will let you know of data £15 for 3 months were are you located

Hi. If you can send it back then I would cheap P2P cameras do get switched off by your service provider as it’s always sending data to China server so that’s classed as unfair usage there are uk based cameras £10 a month pay as you go unlimited data but it depends on your budget

Hi. There is none for a 2015 dvr your units hardware will not support newer software your unit is h264 and cvi only

Hi no it is not possible…. Passive sensors and magnetic sensors require very little power to run ….. usually between 1.5 to 2 amp cctv cameras start at 1amp each ……. Yes there spec says 0.5millamp for cameras but always best working at 1amp each camera to allow for spike when IR and filter change at night cctv power supplies are not expensive and made for the job

Ok. …. As you can see I have given 100s of passwords out but public space and managed … I would need more information anyone could be asking for password that is not supposed to have any access you can pm me your company info with number and then I can help are you based in bury ?

Hi it is much easier to change your existing dvr with more inputs or add another dvr the same make you all ready have …. You can add them both to same app and cms software converting analog to IP then using a pc and software will cost over 100 ….. 5 mp iP is less than that

Hi it depends on your location ….. it is still on the store but removed in some countries as it gets banned Lview and Rview app is also still available but will end up the same I would also suggest you unplug your dvr network cable as your still sending data to there server

Hi could be a number of things if your camera is connected to a nvr then it can’t be reached by external network to register or you have bought secondhand and already registered or you have bought a clone camera that they don’t support

Hi. What is it you want to do ? can you run cat5 for analog cameras ….. yes can you convert bnc camera to iP ……. Yes but a very expensive option