51cent

With normal use, which Foscam defines as ten motion alerts per day, the camera is said to last for three months. Notably, Foscam recommends that you limit streaming to your phone. In fact, in response to a critical Amazon review, Foscam Support explicitly states that Foscam E1 isn't suitable for 24/7 monitoring or for watching over high-traffic areas. For such applications, they recommend their wired security cameras.

http://asecurecam.com/foscam-e1-review/

what's the go with tipping

15%, 20% if they were real good. I haven't done it, but if they were really lousy, nothing.

If you have a new router your external ip address may have changed and/or you may need to forward the port(s) on the new router, but that isn't considered safe any more.

Did your external ip address change? Did you get a new router?

Kev, I agree with Papa, and also turrets are less likely to have a spider problem than bullets. Bullets with the ring of IR bulbs around the lens attract spiders which spin their web across the lens, setting off motion detection.

hello everyone,

 

can someone suggest some p2p camera software that i can use to do monitoring of my ip camera on my pc??????????

 

even its not free its ok

Milestone has a free version I believe. And Blue Iris is great but about $60.

Try using the Hikvision SADP tool.

For a camera, the HTTP port is forwarded, but change it to a different port.Remember that a forwarded camera port leaves it open to the internet and network cameras are vulnerable to attack.

The best way is a vpn client installed on the router. A vpn server, used to hide your porn viewing etc, is different than a vpn client.

Google the term "vpn primer".

Did you forward the port(s)?

Dated, but... viewtopic.php?f=12&t=12156

Thank you for your replies,

Dont suppose a brighter wall light next to my door would solve the face issue?

It may solve the motion issue, but the face one meter away problem is too much light for that short of a distance.

And be wary of posters recommending spam sites.

Car license plates are highly reflective and need a dedicated camera.

Your sons face is too close to the camera with the IR lighting on. If he were back another meter or so it might be ok. When the camera switches too night mode, the camera exposure is longer, letting you see a better static image at night, but any movement will be blurry. A seperate ir light will help, CMVision makes some affordable ones.

Or better yet, switch to a 2mp Dahua Starlight camera.

My pal Tommy will have some good advice too.

This is what worked for me.

For the browser use either Internet Explorer or Chrome with IE tab.

For Internet Explorer you must go tools/internet options/security/trusted sites and add the camera ip address to trusted sites. Then go to custom level tab and allow activex controls.

raefy, they are pushing cheap cameras that will disappoint from their sites. The problem with those cameras is usually the software.

Good affordable reliable cameras are from Dahua and Hikvision, but none that I know of with batteries.

If the cameras support onvif you could try onvif device manager 2.2.250 from Sourceforge for the url.

I would send it back and post the name of the dealer so no one else gets swindled.

With many cameras, support is as good as the store/site selling it.

If night vision is important, look at the Dahua 2 mp ptz starlight cameras, they are the best bang for the buck in my opinion.

Hikvision also makes the similar Ultra lowlight cameras.

Why not put up external IR lighting instead? CMVision makes affordable IR lighting.

If your cameras are 10 years old, you might be surprised by the video improvement in new cameras, even the cheap ones.

Are you a spammer or just an idiot?

IR light attracts spiders who build their webs which sway in a little breeze, not to mention the spiders movements. I believe the circular pattern of the lights on a bullet contibute to the problem. I have 2 bullets and 2 dome cameras, and the domes rarely have problems.

They make wall mounts for turrets/domes. Google the term PFB203W Wall Mount

Dahua makes a new dual camera, I don't know the model number but it is cheaper to buy 2 cameras and use those.

For long distance lens help, google the term lens calculator

Don't mount the cameras too high if you want to id people, you will just get the top of their heads or a hat will hinder id.

With bullet cameras spiders will drive you crazy, turret/eyeball style are much better.

For night vision, look at the Dahua 2mp starlight cameras, but there is no put together systems that I know of. Hikvison also has the Ultra Low-Light cameras for better night vision.

On an old 2cd2132 the setting is under: configuration/advanced settings/image/day-night switch/sensitivity

Fixed

Look up your model, but I would assume most have BLC.

http://overseas.hikvision.com/en/Products_accessries.aspx?c_kind=1&c_kind2=2&c_kind3=432&id=6123

To partially answer your questions, get turret/eyeball style cameras, not bullets. Spiders will drive you absolutely nuts with their webs on bullet cameras.

Mounting 12-14 ft high may be too high for facial identification.

Others will pipe in with more advice, hopefully.

You want a camera with blc, backlight compensation.

https://reolink.com/wdr-blc-hlc-in-cctv-camera-ip-camera/

Which brand is better/best, I don't know, others may chime in and help.

It always worries me when people want INDOOR Domestic installations. I wonder just what their problem is that they are addressing.

Do you mean looking for things like indoor pinhole cameras?