Search the Community
Showing results for tags 'ipcamera'.
Found 5 results
Custom view on DVRs
AnasMirza8867 posted a topic in Computers/NetworkingHey guys , So the problem is , i have 5 ip cameras lets name them for ease Cam1-2-3-4-5 i want to display the output to three led’s (locally) but the issue is , one from the three ouput shouldn’t show the cam5. so as per my understanding i need another XVR . how could i connect my secondary XVR to primary XVR , or if you guys have any better idea , im all ears . thanks
NVR & IP camera best settings
playtime posted a topic in Installation Help and AccessoriesI am new to cctv, making changes for last 10 days but every time a new problem arises. right now I am facing an issue which is my nvr records a video in approx 1 min or 30s files. set to motion recording, if there is an ongoing motion of 2 mins the recorded video in 1st file is good but, in second video the recording is not starting just after it finished after a first video there is a gap of 4-6s. following is my Devices pls guide me to achieve best settings. I am from India. Camera Specifications Hikvision 2MP POE Bullet Camera Max. Resolution :1920 × 1080 Shutter Time :1/3 s to 1/100, 000 s Main Stream : 50 Hz: 25 fps (1920 × 1080, 1280 × 720) : 60 Hz: 30 fps (1920 × 1080, 1280 × 720) Video Compression: Main stream: H.265/H.264/H.265+/H.264+ : Sub-stream: H.265/H.264/MJPEG : Third stream: H.265/H.264 Video Bit Rate : 32 Kbps to 8 Mbps H.264 Type : Baseline Profile/Main Profile/High Profile H.265 Type : Main Profile NVR Specifications Hikvision DS-7W04NI-Q1/4P 4-Channel Built-in PoE NVR Supports H.265/H.264/H.265+/H.264+ HDD 500GB Internet 40Mbps rated, actual speed 40-50Mbps Total 5 Devices connected at a time, MacBook, TV, ipad, cell phone & NVR Below is my current settings: Motion detection On resolution 1920x1080P video quality: Highest fps: 25 pre & post recording set to: 10s Bitrate: Constant 4096 Compression: H.264+
Any software for IP cameras management？
Vila8605 posted a topic in IP/Megapixel Cameras and Software SolutionsFor central management and monitoring of all the cameras, do you have any recommendation? I find out most of suppliers offer complicated system with massive interfaces, it is good but not suitable for the person who do not want to spend too much time on learning.
Used chinese "VANDSEC VN-MV20" camera IP reset
baku posted a topic in Installation Help and AccessoriesHello everyone. I got myself a used POE camera that I want to connect to an NVR. The problem is that I see that camera has IP assigned to it 169.254.222.101 and I'm on network 192.168.0.0. It's discovered by an NVR but if I try to change IP it just says wrong username/password. How would I change the IP? Maybe there's a way to completely reset it? It's a china brand "VANDSEC VN-MV20" and there's very little info about it. Can anyone give me any tips? https://www.vandsec.com/cn/info4024.html