cmarin 0 Posted February 26, 2008 Hi there, I have a kalatel ptz on a kodicom dvr- not working- protocol is set to kalatel and address is on one- what would the baud rate be for com port 1? thanks, Share this post Link to post Share on other sites
heloder 0 Posted February 26, 2008 What software version? There is a bug in some of the older ones. Share this post Link to post Share on other sites
cmarin 0 Posted February 27, 2008 diginet 4.1 or so Share this post Link to post Share on other sites
crirvine 0 Posted February 27, 2008 The kalatel ptz units I have seen use only kalatel ptz format but you can buy an adapter from them not cheap but for sale by them. Share this post Link to post Share on other sites
heloder 0 Posted March 2, 2008 You are using software that is 4 years old. You need to upgrade to 5.1. Share this post Link to post Share on other sites
cmarin 0 Posted March 13, 2008 Thanks, I got it to work with a Kalatel KTD312 interface module connected all four PTZ's but only one works- added them on the software and on the pins for the ptz's but still not moving, any ideas? thank you! Cmarin Share this post Link to post Share on other sites
cmarin 0 Posted March 17, 2008 So that you now, I had to daisy chained them and address the pins properly- it is working, but its a little slow.... Share this post Link to post Share on other sites
