mattmbr2005 0 Posted February 14, 2013 Hello All A regular client is planning on a new car park and like many people, want to utilise the lamp posts for lighting as a point of CCTV. I've done this before with wireless bridges to the building and then cabled back to the central CCTV room, tapping into the power from the post. However this time the client feels this is too costly and wants to cable underground. My questions are: Do you CCTV installers usually do this yourselves? or get ground works to lay it with builders rope lines and just pull through your cables after? Do you have any recommended conduits supplied in the UK? My only experience of this before was a job where all the conduit and pull lines were already in place, but obviously I cannot run in the same as mains power... Thanks people Share this post Link to post Share on other sites
Neutech 0 Posted February 15, 2013 Get your own pipes laid by contractor doing the rest, if theres an issue its his problem then not yours We always pull in our own cables as the contractors tend to be a bit rough on cable etc Share this post Link to post Share on other sites
mattmbr2005 0 Posted February 15, 2013 Thanks, So do you get them to leave you a pull line installed? I don't have fancy remote control robots Matt Share this post Link to post Share on other sites
Neutech 0 Posted February 16, 2013 Most of the time they put tow lines in, if they dont we blow our own in using compressor Share this post Link to post Share on other sites
