wkdwrx 0 Posted July 14, 2013 hi all im thinking buy a new dvr as im not happy with my ge dvr 30 not very good pic quality and when play back it got very slow pause takes like 1/2 sec to pause and play back is disgusting . im thining of buying a new 16ch dvr heres the specs I just wanna know if its any good This listing is for 16 ch standalone dvr.without hard driveThis is FULL D1 16 ch which means records16 ch at d1 resolution at the same time.Most of the dvr on ebay are D1 but not all 16 channels.( pay attention on other listings) High deffinition output ,HDMI ,VGA and BNC output.This unit weights 6 kg without hard drive.Any questions are welcome.This is proffesional unit.I'm sure the installers know what 200 FPS at D1 resolution means>this units sell for around $1000 + trade price .If you need a hard drive let me know. I can install for you 2 or 4 tb at additional cost. ◇16-Channel H.264 Network Digital Video Recorder (16CH × D1 ) ◇Video Compression: H.264; Video System: PAL/NTSC ◇Video input/output: RCA 16-channel Input and 1-channel RCA Output and 1-channel VGA Output; VGA Resolution: 1024x768,1280x1024；1-channel HDMI output, ESATA Out ◇Audio input/output: BNC 16-channel input/ BNC 2-channel output ◇Alarm input/output: 16-channel input/2-channel output ◇Display resolution: D1 704 x 576 (PAL); D1 720 x 480 (NTSC) ◇Display frame rate: 400fps(PAL);480fps (NTSC) (shared by 16 cameras) ◇Recording resolution: D1 704×576 /CIF 352×288 (PAL); D1 720×480 /CIF 352×240 (NTSC) ◇Recording frame rate: D1@400fps/ CIF@400fps ( (PAL); D1@480fps/CIF@480fps(NTSC) ◇Playback resolution: 8 x D1 ◇RJ-45 Ethernet connector; Support Static, Dynamic IP and Support TCP/IP, PPPOE, DHCP, DNS DDNS, UPNP ◇ Support Internet Explorer, Mobile phone and special client software ◇With RS485 x 2, 2 × USB, 1 × IR Controller , 1 × USB2.0 mouse, PTZ ◇Support PELCO-P&PELCO-D PTZ control ◇Support 2 SATA Hard Disk inferface (4TB in total) ◇Multi-language OSD ◇Dimension: 405mm×330mm×65mm (LxWxH) Weight:6.0Kg Warranty 2 years. Share this post Link to post Share on other sites
tomcctv 187 Posted July 14, 2013 Hi. Any cheap unit that shows the same FPS for both CIF and D1 stay away from What is your budget . ? Share this post Link to post Share on other sites
vector18 1 Posted July 15, 2013 hold on one second, that thing is h.264! It must be a good dvr! Share this post Link to post Share on other sites
joseph.chen0312 0 Posted July 15, 2013 May I know which resolution of TVL you install? I assume those may 700tvl( 960H) is it? Share this post Link to post Share on other sites
wkdwrx 0 Posted July 15, 2013 ok forget about the jokes please so this dvr is no good . its $650 aus its for my house . and don't wanna spend much more then that I know you get what you pay for . but when payn a house off alone its a lot of money . I need to buy one in a week cause im on a weeks holidays and want to install it . and my cameras are 700tvl Share this post Link to post Share on other sites
joseph.chen0312 0 Posted July 16, 2013 Hi You could try other resolution camera e.g. 420, 520 or 600tvl you may finding out difference from 700tvl. As you pointed out DVR is D1 but you hook up 700tvl as I presumed. Actually, 700tvl camera is more width than D1 so its called WD1. We have learned if you connect those two device it may caused distort and abberation in DVR display. Hence, you may get some 700tvl ( 960H/WD1) dedicated DVR and you will seeing better as you expect. Share this post Link to post Share on other sites
wkdwrx 0 Posted July 22, 2013 please delete this thread Share this post Link to post Share on other sites
