Unable to view remotely

[lordzephyr 0]

Here are my DVR settings;

 

Local IP: 192.168.0.12

Subnet mask: 255.255.255.0

Gateway: 192.168.0.1

Primary DNS: 192.168.0.1

Secondary DNS: 192.168.0.1

command port: 8101

HTTP PORT: 81

update port: 27156

 

default mobile or tcp port of DVR is 15966.

forwarded port 81 on ip 192.168.0.12

 

still unable to get it working remotely.

[Securame 0]

Here are my DVR settings;

 

Local IP: 192.168.0.12

Subnet mask: 255.255.255.0

Gateway: 192.168.0.1

Primary DNS: 192.168.0.1

Secondary DNS: 192.168.0.1

command port: 8101

HTTP PORT: 81

update port: 27156

 

default mobile or tcp port of DVR is 15966.

forwarded port 81 on ip 192.168.0.12

 

still unable to get it working remotely.

 

You need to forward in both TCP and UDP all the needed ports, not just the web port; 81, 27156, 8101 and 15966

 

Also, I would change secondary DNS to 8.8.8.8 (Google's DNS), it is useless to have it set to the same as the primary DNS.

[lordzephyr 0]

I have forwarded all the needed ports on 192.168.0.12. still cant view remotely. Can i check the config on my smartphone app?

 

address = *******.no-ip-org

Port: 15966

user ID : DVR ID

Password: DVR password

 

Here are my DVR settings;

 

Local IP: 192.168.0.12

Subnet mask: 255.255.255.0

Gateway: 192.168.0.1

Primary DNS: 192.168.0.1

Secondary DNS: 192.168.0.1

command port: 8101

HTTP PORT: 81

update port: 27156

 

default mobile or tcp port of DVR is 15966.

forwarded port 81 on ip 192.168.0.12

 

still unable to get it working remotely.

 

You need to forward in both TCP and UDP all the needed ports, not just the web port; 81, 27156, 8101 and 15966

 

Also, I would change secondary DNS to 8.8.8.8 (Google's DNS), it is useless to have it set to the same as the primary DNS.

[aibudo 0]

Have you confirmed that your ports are open, ie;

 

canyouseeme.org

[luckyfella 0]

Which DVR do you have?

[Numb-nuts 1]

Firstly, Your hostname should be ********.no-ip.org notice the DOT org not -org

 

in the network settings dialogue box have to set the DHCP to disable or unticked?

This should be unticked.

Next, where did you get the IP for your DVR was it through the DHCP?

I always set the device identifier to 200 or higher to avoid IP conflicts.

 

It might be useful to know what brand and model your router is.

 

On some routers the IP range are all in the HCP range and you have to set the address you choose to static before port forwarding.

 

Yes I always set all the ports to 'both' TCP and UDP that way you don't need to know which is appropriate as one of them has to be.

 

Port 80 or 81 is your HTTP port, i.e. your internet port. This is the port you use for viewing your DVR via a browser (usually IE but Firefox is also good)

You simply type the IP address 192.168.0.12 when logged on your LAN, and the public IP (or DNS hostname) when outside the network ( works both in the LAN and outside) followed by a colon ( and the HTTP port number, in this case 81

eg *******.no-ip.org:81

typing this into the address bar of a browser, you should be presented with a login page. USERNAME PASSWORD

 

The other ports you need to open are the media port and the mobile monitor port. If you want to use a tablet also open the RTSP port which is listed under your NETSERVICES menu where you can read the default mobile monitor port also.