Jump to content
Sign in to follow this  
secplus

Dahua OEM firmware list

Recommended Posts

I was able to get my hands on the OEM version of the Dahua firmware that's supposed take care of the "hacked"

issue that just came out again recently. I have a list of the model and versions that I currently have. I'm going to setup a folder on a cloud account and provide links to those that ask:

 

HCVR HCVR5104H V3.200.0001.30.R.20170807

HCVR HCVR5104H-V2 HCVR5104H-S2 V3.200.0004.11.R.20170417

HCVR HCVR5108H V3.200.0001.30.R.20170807

HCVR HCVR5108H-V2

HCVR5108H-S2

HCVR5208A-V2

HCVR5208A-S2 V3.200.0004.11.R.20170417

HCVR HCVR5116H-V2 HCVR5116H-S2 HCVR5216A-V2

HCVR5216A-S2 HCVR7108-V2 V3.200.0004.11.R.20170417

HCVR HCVR7416L HCVR7416-S2 HCVR7816S HCVR5432L

HCVR5432L-S2 HCVR5432-V2 HVCR5832-S2

HCVR5832 HCVR7808 V3.210.0001.0.R.20160322

HCVR HCVR5416 V3.200.0001.21.R.20170731

HCVR HCVR5104H-S3 V3.218.0000001.2.R.170808

HCVR HCVR5108-S3 HCVR5208A-S3 HCVR7104-S3 V3.218.0000001.2.R.170808

HCVR HCVR5116H-S3 HCVR5216A-S3 HCVR7108-S3 V3.218.0000001.2.R.170808

HCVR HCVR8816S-S3 V3.218.0000.0.R.20170613

HCVR HCVR7116S-S3 V3.218.0000001.2.R.170808

HCVR HCVR7104-4M HCVR7208-4M HCVR7108-4M V3.218.0000001.2.R.170808

HCVR HCVR7216-4M HCVR7116-4M V3.218.0000001.2.R.170808

 

XVR XVR5X04 V3.218.0000001.2.R.170808

XVR XVR5X08 V3.218.0000001.2.R.170808

XVR XVR5X16 V3.218.0000001.2.R.170808

XVR XVR5416 V3.218.0000001.2.R.170808

XVR XVR7416 XVR5832 V3.218.0000001.2.R.170808

 

NVR NVR41XX NVR42XX NVR44XX V3.203.0000.0.R.20170612

NVR NVR52XX NVR54XX V2.616.0000.0.R.20170922

NVR NVR608-XX NVR6XX-4K V3.210.0003.0.R.160714

NVR NVR74XX NVR78XX V3.200.0000.0.R.20160412.

 

DVR DVR5104H V3.200.0001.28.R.20170802

DVR DVR5108H DVR5208A V3.200.0001.28.R.20170802

DVR DVR5116H DVR5216A V3.200.0001.28.R.20170802

 

Configuration Tool

Config Tool (new)

Config Tool (old)

GMJwzFN.jpg

 

Here's the link on a dropbox that I created just to distribute these to the masses...Hopefully it can help you guys out.

 

REMEMBER: ADMIN AND 888888 PASSWORDS MUST BE CHANGED. IN CASE THE UPGRADE DOESN'T DO IT, MAKE SURE YOU "DEFAULT" THE SYSTEM AFTER UPGRADE.

 

https://www.dropbox.com/sh/1rxrp74581w6jf4/AAC_3juDKNWTzua4tURGjQ17a?dl=0

Share this post


Link to post
Share on other sites

Hi. I upgraded my Dahua XVR5104HS to new firmware (from “3.210.0001.8 2017-03-07” to “3.218.0000001.2 2017-08-08”) and unfortunately my ONVIF cameras stop working, then I tried to downgrade without success (an error received), do you know how can be done?

 

Thanks in advanced.

Share this post


Link to post
Share on other sites

Hi. I also upgradede my XVR5108H with apropriate version (stated in description for 5x08H only), but now it wont even start.

Monitor is restarting, it doest not open web access, but interesting it is pingable.

Any ideas anyone?

Share this post


Link to post
Share on other sites
Hi. I upgraded my Dahua XVR5104HS to new firmware (from “3.210.0001.8 2017-03-07” to “3.218.0000001.2 2017-08-08”) and unfortunately my ONVIF cameras stop working, then I tried to downgrade without success (an error received), do you know how can be done?

 

Thanks in advanced.

 

you probably have to enable the IP camera ports. Go to the menu, then Camera, then CAM TYPE, then on the right column, look for the IP box, check it and restart the DVR, you should then be able to see the camera registration option to add ONVIF cameras

 

reference: http://dahuawiki.com/ConnectIPCtoHCVR

 

Hi. I also upgradede my XVR5108H with apropriate version (stated in description for 5x08H only), but now it wont even start.

Monitor is restarting, it doest not open web access, but interesting it is pingable.

Any ideas anyone?

 

Did you use XVR5x08 or HCVR5x08? you might have uploaded the wrong firmware, which would be weird becase the system usually returns an error if it's the wrong firmware. You might need to "telnet" into the unit to upload the correct firmware. Others here can help you with that since I don't know how to do it.

Share this post


Link to post
Share on other sites

I bought my equipment from Security Camera King, model number TRIDVR-EL8ME4 which I believe is Dahua equipment. A technician from SCK gave me a link to most recent firmware which is almost identical to the one you posted, but not exactly. Here is the file:

 

https://app.box.com/s/wkkl6rj3bvwud3rtxscvkstzx7qqjtob

 

SCK File Name: General_HCVR7x08-4K_Eng_PN_V3.218.0000001.2.R.170808.bin

SCK File Length: 21,619 KB

 

Your File Name: General_HCVR7x08-4K_Eng_NP_V3.218.0000001.2.R.170808.bin

Your File Length: 21,744 KB

 

The name of these two files differ with the letters 'PN' being reversed to 'NP'. I am waiting to flash the firmware until I have made certain that I will not brick my DVR. Can you offer any explanation as to why they're different?

 

 

Any help or comment is welcome,

Thanks

Share this post


Link to post
Share on other sites
I was able to get my hands on the OEM version of the Dahua firmware that's supposed take care of the "hacked"

issue that just came out again recently. I have a list of the model and versions that I currently have. I'm going to setup a folder on a cloud account and provide links to those that ask:

 

HCVR HCVR5104H V3.200.0001.30.R.20170807

HCVR HCVR5104H-V2 HCVR5104H-S2 V3.200.0004.11.R.20170417

HCVR HCVR5108H V3.200.0001.30.R.20170807

HCVR HCVR5108H-V2

HCVR5108H-S2

HCVR5208A-V2

HCVR5208A-S2 V3.200.0004.11.R.20170417

HCVR HCVR5116H-V2 HCVR5116H-S2 HCVR5216A-V2

HCVR5216A-S2 HCVR7108-V2 V3.200.0004.11.R.20170417

HCVR HCVR7416L HCVR7416-S2 HCVR7816S HCVR5432L

HCVR5432L-S2 HCVR5432-V2 HVCR5832-S2

HCVR5832 HCVR7808 V3.210.0001.0.R.20160322

HCVR HCVR5416 V3.200.0001.21.R.20170731

HCVR HCVR5104H-S3 V3.218.0000001.2.R.170808

HCVR HCVR5108-S3 HCVR5208A-S3 HCVR7104-S3 V3.218.0000001.2.R.170808

HCVR HCVR5116H-S3 HCVR5216A-S3 HCVR7108-S3 V3.218.0000001.2.R.170808

HCVR HCVR8816S-S3 V3.218.0000.0.R.20170613

HCVR HCVR7116S-S3 V3.218.0000001.2.R.170808

HCVR HCVR7104-4M HCVR7208-4M HCVR7108-4M V3.218.0000001.2.R.170808

HCVR HCVR7216-4M HCVR7116-4M V3.218.0000001.2.R.170808

 

XVR XVR5X04 V3.218.0000001.2.R.170808

XVR XVR5X08 V3.218.0000001.2.R.170808

XVR XVR5X16 V3.218.0000001.2.R.170808

XVR XVR5416 V3.218.0000001.2.R.170808

XVR XVR7416 XVR5832 V3.218.0000001.2.R.170808

 

NVR NVR41XX NVR42XX NVR44XX V3.203.0000.0.R.20170612

NVR NVR52XX NVR54XX V2.616.0000.0.R.20170922

NVR NVR608-XX NVR6XX-4K V3.210.0003.0.R.160714

NVR NVR74XX NVR78XX V3.200.0000.0.R.20160412.

 

DVR DVR5104H V3.200.0001.28.R.20170802

DVR DVR5108H DVR5208A V3.200.0001.28.R.20170802

DVR DVR5116H DVR5216A V3.200.0001.28.R.20170802

 

Configuration Tool

Config Tool (new)

Config Tool (old)

GMJwzFN.jpg

 

Here's the link on a dropbox that I created just to distribute these to the masses...Hopefully it can help you guys out.

 

REMEMBER: ADMIN AND 888888 PASSWORDS MUST BE CHANGED. IN CASE THE UPGRADE DOESN'T DO IT, MAKE SURE YOU "DEFAULT" THE SYSTEM AFTER UPGRADE.

 

https://www.dropbox.com/sh/1rxrp74581w6jf4/AAC_3juDKNWTzua4tURGjQ17a?dl=0

 

I bought my equipment from Security Camera King, model number TRIDVR-EL8ME4 which I believe is Dahua equipment. A technician from SCK gave me a link to most recent firmware which is almost identical to the one you posted, but not exactly. Here is the file:

 

https://app.box.com/s/wkkl6rj3bvwud3rtxscvkstzx7qqjtob

 

SCK File Name: General_HCVR7x08-4K_Eng_PN_V3.218.0000001.2.R.170808.bin

SCK File Length: 21,619 KB

 

Your File Name: General_HCVR7x08-4K_Eng_NP_V3.218.0000001.2.R.170808.bin

Your File Length: 21,744 KB

 

The name of these two files differ with the letters 'PN' being reversed to 'NP'. I am waiting to flash the firmware until I have made certain that I will not brick my DVR. Can you offer any explanation as to why they're different?

 

 

Any help or comment is welcome,

Thanks

Share this post


Link to post
Share on other sites
Hi POE and none POE

Just give security king your serial number for right firmware

 

I don't understand what you mean by Hi POE and none POE, could you explain please?

Share this post


Link to post
Share on other sites
POE and none POE

Just give security king your serial number for right firmware

 

Those are HDCVI units, so there is no POE version.

 

The N and P on Dahua firmwares usually relaters to PAL and NTSC versions. But I really doubt there are any differences, since our units are all PAL but can easily be switched to NTSC from the system menu. When using CVI/TVI/AHD cameras, and VGA/HDMI output, I guess you just don't care about that any more.

 

But if the technician from SCK gave you a firmware, just flash that one. Why would you want to flash a random firmware downloaded from a random site that is not even for your unit?

Share this post


Link to post
Share on other sites

Tengo un dvr dahua modelo dh-dvr2116h-v2, esta semana empezó a reiniciarse cada cierto tiempo y dejar de reconocer el disco duro, quisiera saber si se puede reparar con una actualización de firmaware y si es tiguo así tal vez alguien tenga el archivo. Saludos

 

 

 

 

imagen.thumb.png.0216f18ea14e8a7323d713c34bcffd68.png

 

 

 

 

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

×