DarrenA 1 Posted February 13 Hello all, I have a issue and I hope someone here can lend a hand..... I bought these cams a while back as spares for my NVR system. That said today I needed one of them and when I went to use the tools the cam said it required, I was able to init the cams with login and password along with my email, I could SEE the cam in said tool but when I went to modify the IP it appeared to work but the IP is still 192.168.1.108 in the program and I can not view the cam in the Smart PSS software (as it sees it as the default IP) I tried both cams and same result. At this time I am not even sure I have the right software to be honest. It is config tool 5.(some string of ling ass numbers) I bought these as they were Onif compatible and my GW security NVR works well with that format. I am at this time a little lost to be honest, and could use a guiding hand. Share this post Link to post Share on other sites
fourtytwo 1 Posted March 7 Similar thread above and I can only make a similar comment, you don't say how long a while is or where you bought then from ? Share this post Link to post Share on other sites
DarrenA 1 Posted March 31 Thank you for the reply. I bought these New from Ebay, and they sat on a shelf for a couple months ish... Never received any software for the cams, Just a QR code that reads as nothing on my phone. Not sure where to attempt to look other than here for help to be honest. Never used this "brand" of cams before but reviews showed they were great. I must have missed a step or something is the only thing I can guess. Share this post Link to post Share on other sites
JasonJunior 0 Posted April 20 On 2/14/2023 at 3:48 AM, DarrenA said: Hello all, I have a issue and I hope someone here can lend a hand..... I bought these cams a while back as spares for my NVR system. That said today I needed one of them and when I went to use the tools the cam said it required, I was able to init the cams with login and password along with my email, I could SEE the cam in said tool but when I went to modify the IP it appeared to work but the IP is still 192.168.1.108 in the program and I can not view the cam in the Smart PSS software (as it sees it as the default IP) I tried both cams and same result. At this time I am not even sure I have the right software to be honest. It is config tool 5.(some string of ling ass numbers) I bought these as they were Onif compatible and my GW security NVR works well with that format. I am at this time a little lost to be honest, and could use a guiding hand. Ask for support from the vendor you buy from. Share this post Link to post Share on other sites
JasonJunior 0 Posted April 20 On 2/14/2023 at 3:48 AM, DarrenA said: Hello all, I have a issue and I hope someone here can lend a hand..... I bought these cams a while back as spares for my NVR system. That said today I needed one of them and when I went to use the tools the cam said it required, I was able to init the cams with login and password along with my email, I could SEE the cam in said tool but when I went to modify the IP it appeared to work but the IP is still 192.168.1.108 in the program and I can not view the cam in the Smart PSS software (as it sees it as the default IP) I tried both cams and same result. At this time I am not even sure I have the right software to be honest. It is config tool 5.(some string of ling ass numbers) I bought these as they were Onif compatible and my GW security NVR works well with that format. I am at this time a little lost to be honest, and could use a guiding hand. If not maybe I can assit you. You got the IP right? log into the IP camera, set to DHCP, IP camera will auto grab what's assign to the camera, go back smartpss and search. I wll auto assign the IP and gateway. Share this post Link to post Share on other sites
