rory 0 Posted June 11, 2007 If you are going to use these Cameras, with 24VAC, and you will be using a Distributed (multi channel) Power supply, make sure you purchase an ISOLATED Distributed Power Supply. Otherwise you may experience horizontal lines and other issues. If you use separate transformers there is no need for it as they are already isolated. The Correct Distributed Power Supply Model I just recently used on a job with 11 EX82's was the Altronix ALTV2416ULI3. The previous ALTV2416600UL3 will not work for these cameras. Rory Share this post Link to post Share on other sites
CSG 0 Posted June 12, 2007 Yup, been there done that Share this post Link to post Share on other sites
scorpion 0 Posted June 13, 2007 Thank you for the heads up! Share this post Link to post Share on other sites
kao 0 Posted June 14, 2007 Do you think this could be true for other cameras as well? I am thinking of going with only isoloated channel power supplies in the future. Share this post Link to post Share on other sites
rory 0 Posted June 14, 2007 If you can find them, sure, for the Pro cameras. For the bullets I dont think its really worth it. Probably only for 24VAC also. The Isolated power supply above had to be special ordered as the distributor only had the regular one. Rory Share this post Link to post Share on other sites
