mkurtzhals 0 Posted September 12, 2007 We have a DVR device that connects 10 cameras. For some reason all of a sudden all of the odd numbered cameras would not show up. They eventually do show up but are very delayed. I tried switching the cameras to different numbers and just the evens work regardless of camera then the odd ones eventually show up. My first thought was somekind of network issue so I tried changing MTU settings on the DVR and still have no luck. Could it be just a bad DVR or do I have somekind of network issue. THanks Share this post Link to post Share on other sites
CCTV_Suppliers 0 Posted September 12, 2007 Do you see the same problem locally vs. remote connect? Share this post Link to post Share on other sites
mkurtzhals 0 Posted September 12, 2007 Nope on the local connection all the cameras are up and working. Share this post Link to post Share on other sites
mkurtzhals 0 Posted September 12, 2007 This is the same if I use wavereader or just directly connect via port 80 through a web browser. Share this post Link to post Share on other sites
CCTV_Suppliers 0 Posted September 12, 2007 Suggestion... get the updated version of the wavereader... I think it should be avail from GE Security website.. Unfortunately, looks like we can not post any links in this forum... Since you have the original version, I am sure you can get the updated version... Give it a try and let us know. Share this post Link to post Share on other sites
rory 0 Posted September 12, 2007 Wave Reader v 4.2.47 (31 MB) Posted: 7/12/2007 http://www.gesecurity.com/portal/site/GESecurity/menuitem.1558a63818f2c07ad0f3d010c4030730/?vgnextoid=711800a1e7184010VgnVCM100000592d7003RCRD Share this post Link to post Share on other sites
CCTV_Suppliers 0 Posted September 13, 2007 Good job Rory... I knew you will come through.. Unfortunately I do not have the capability to post location where this file was... but you beat me to it... Share this post Link to post Share on other sites
rory 0 Posted September 13, 2007 No problem I think there is an initial 25 post limit before being able to post links. Share this post Link to post Share on other sites
CCTV_Suppliers 0 Posted September 13, 2007 No problem I think there is an initial 25 post limit before being able to post links. Well, then I should start moving now... and get my next 5 posts... Share this post Link to post Share on other sites
rory 0 Posted September 13, 2007 Well, then I should start moving now... and get my next 5 posts... Yep, get right on it. Share this post Link to post Share on other sites
mkurtzhals 0 Posted September 13, 2007 Yep tried updating the firmware. Is there somekind of config that says load these cameras first or something. If you plug one of the non-working cameras into a working cameras port the camera works just fine. Is this device just hosed? Share this post Link to post Share on other sites
Bullwinkle100 0 Posted September 20, 2007 Can anyone help me identify the followinf error with the Wavereader software WRControl WSKIO_Data arrival;subscript out of range. Thanks Troy Share this post Link to post Share on other sites
