Jump to content


  • Content Count

  • Joined

  • Last visited

Everything posted by tragic_audio

  1. Dont use motion detection its simple to use
  2. Can you change camera power supply unit?
  3. Hello, your dvr support only 3mp/2mp/1mp analog camera, not 5mp. You can check "encoding resolution" info in this manual https://www.hikvision.com/content/dam/hikvision/products/S000000001/S000000132/S000000133/S000000134/OFR000179/M000005714/Data_Sheet/UD11361B_Datasheet of DS-7200HQHI-K_P_V4.2.0_20181102.pdf
  4. tragic_audio

    HD-SDI camera with a pink hue

    Hi You need ir-cut filter. Its solve your pink hie problem.
  5. tragic_audio


    Hello! You want to connect new cameras to your 720p dvr?
  6. tragic_audio

    Adding Cameras

    Hello! Send here screens of your dvr and camera stickers on the box
  7. tragic_audio

    BNC Camera

    Hi, your camera support two voltages: 12 and 24 at all?
  8. tragic_audio

    qvis pioneer quattro camera upgrade

    There is no issue to transfer audio channel via coax. You can use external mic and connect it to your audio in socket in your dvr.
  9. tragic_audio

    Channel black screen

    Hi, can you show some screenshot?
  10. tragic_audio

    Xmeye and Explorer issue

    can you try to use windows app CMS?
  11. tragic_audio

    How to watch zosi system on mobile

    hello! can you ping your dvr in home network?
  12. tragic_audio

    Horizontal Line Through Middle Of Image

    can you measure how many volts at the end of the cable? What does the cable you use look like? Is there one coax and one power supply? or are all the wires the same? If you use a ready-made cable from the manufacturer, it is usually the cheapest and most whimsical cable.
  13. Hello! In this topic I would like to share my impressions of the wireless camera. Perhaps my review will be useful. This is a simple device for solving not complicated tasks. I bought this camera to install near to the entrance door and see what happens there. I chose and watched various devices for a long time, expensive and cheap. From the very beginning I was not sure which camera I needed. Therefore, to experiment purchased a wireless camera on Amazon. I decided not to buy the cheapest device and focused on the reviews and their number. The requirements were as follows: - wifi connection - write to USB flash drive - ability to connect to the registrar if required - metal case - night lights - easy setup and installation SPECS: Sensor: 1/3 "SC1235 CMOS Processor: HiSilicon Hi3518Ev200 Minimum level of illumination: 0.1 Lux @ (F2.0, AGC ON), 0.01 Lux with IR Frame rate: 15 fps (main stream) Lens: 3.6mm Compression Format: H.264 IR LED: 24 LEDs IR illumination range: 20m Power supply: DC12V, 1A Temperature range: -20 - 80 С Protection Level: IP66 Body Material: Metal Viewing angle (according to the formula a = 2arctg (d / 2f)): 74 degrees Wired interface: 1 RJ45 10 m / 100 m Wireless Interface: Realtek RTL8188ETV (802.11bgn) Equipment: - ip-camera; - power supply 12V / 1A (length 3 meters); - removable wifi antenna; - mounting kit with a template and hex; - UTP cat5e 4x2 AWG24 patch cord (1 meter long). Below you can see a compartment for installing a microSD flash card. The compartment is closed with a lid on two screws. Swivel bracket, I would say classic. The camera can be rotated at different angles and fixed as needed. A black overlay is attached to the visor to prevent stray light from the IR LEDs. Personally, I would prefer a black paint spraying, instead of a visor, which over time can fall off and it happens. Wiring harness is very standard for such devices: RJ45 8p8c jack, DC12V power jack and camera reset button. To reset the settings, it is enough to apply power to the camera, wait until it is fully turned on and hold the button down for 5 seconds. SOFTWARE Remote access to the camera works thanks to p2p technology. For connection to a camera from a PC on Windows, the manufacturer offers the program AVSS PC client. The process of adding a camera is the same as in the CMS application, however AVSS immediately finds the camera via the media port, and in the CMS you need to add the camera manually. Finally, the last application you need to say is mobile. ZOSI is betting on it as an easy and effective way to interact with the camera. We need the program Zosi Smart App. The name is the same in both app stores for known platforms. I tested it for android. The process of adding a camera is very simple and is described in detail in the instructions. To be able to view remotely, not from the home LAN, you need to register, however, the confirmation code may not arrive in the mail the first time. I came at the second attempt. After searching and adding a camera, the program requires you to change the standard password to your own and we get to the main window VIDEO QUALITY Image quality is expected for a camera whose resolution is still closer to 1Mp. There are not enough stars from the sky, which means that the range of tasks for such a device will be more than trivial, for example, overview functions: materials brought to your object or not yet, whether your employee went to work or not, is your shovel at the fence or is it up your neighbor, watching an older man / child. In general, the simplest household tasks without frills and claims for serious video surveillance. PROS AND CONS + wifi + write to USB flash drive + onvif support, which means that a ip camera can connect to any NVR + long power cord + looks serious, the neighbor is jealous. - no poe - clumsy mobile software - there is no web interface These and other photos you can see at google drive Made a simple video with day and night shooting I will also answer your questions about the camera.
  14. Its possible only via internet. If your dvr suppport p2p tech.
  15. Hello! Power supply enough for camera? Can you try to change power supply to another?
  16. tragic_audio

    The Site Software Upgrade Issue Topic

    thanks, youtube link easy to insert. Just paste link and video preview is ready)
  17. hi tomcctv! Can you can you give an example? It's all relative. For serious tasks of course better wired connection. For those tasks about which I wrote such a solution is fully justified.
  18. tragic_audio

    Networking for CCTV

    what exactly is the question
  19. tragic_audio


    hello! It's called as "remote access". Each manufacturer has its own programs for remote access. What manufacturer equipment do you use?
  20. tragic_audio

    The Site Software Upgrade Issue Topic

    I probably already got you, but again I’m talking about pictures. I can reupload my pictures in my topic if the edit button is available.
  21. tragic_audio

    The Site Software Upgrade Issue Topic

    i noticed that all attached pics are vanished drom the post. overall forum looks nice, works fast.
  22. tragic_audio

    Wireless Security Camera help

    Hello! Do you try to use EZVIZ PC Stusdio?
  23. tragic_audio

    Lorex 4MP to Q-See system?

    problems with BNC-connectors should not be. If camera and DVR have same format (AHD, TVI, CVI) everything should work.
  24. tragic_audio

    please help me!!

    you can reset all setting by defalut via DVR menu. maybe it will help
  25. Hello! can you make a screenshot with DVR date and time and web interface?