New Dvr is recording when bugs pass..

[Snow_death 0]

I setup the detection on my AVTECH 4Ch MPEG 4 dvr and but I don't know how to change the sensitivity. What is

LS

SS

TS

RE

 

They all have the following values

 

LS SS TS RE

07 03 02 10

 

Thank you in advance!

[scorpion 0]

Hello!

 

▲▼◄►: Navigate between targets.

d) LS :

The sensitivity of comparing two different images. The smaller the value is,

the higher sensitivity for motion detection.

The highest sensitivity setting is 00 and the lowest sensitivity setting is 15.

The default value is 07.

e) SS :

The sensitivity regarding the size of the triggered object on the screen (the

number of motion detection grids). The smaller the value, the higher

sensitivity for motion detection.

The highest sensitivity setting is 00 and the lowest sensitivity setting is 15.

The default setting is 03.

Note: The default setting of Spatial Sensitivity is 03, which means once a object

is detected more than 3 grids, the system will get triggered. So the value

of Spatial Sensitivity must be less than the number of grids that you set

up for the motion detection area.

f) TS :

The sensitivity regarding how long the object gets triggered. The smaller

the value, the higher motion detection sensitivity will be.

The highest sensitivity setting is 00 and the lowest sensitivity setting is 15.

The default setting is 02.

g) RE :

The value of RE is a reference for detection. The default value is 10, which

means DVR will compare 10 continuous images at one time according to

the sensitivity of LS, SS, TS simultaneously. The bigger the value, the

higher sensitivity for motion detection. The highest sensitivity is 61.

h) ALARM:

Select LOW / HIGH for the alarm polarity. The default alarm value is OFF.

 

For others reading this post you can go to my website, and download the manual if you need more info.

[CollinR 0]

It's almost universal, unless you use the advanced MD features of a Geovision, Avermedia or some NVR softwares. Basically you will limit the size of the object and it's direction of travel. So it may still record bugs close to the camera moving fromthe top to the bottom but not ones going left to right, or vise versa.

[Snow_death 0]

GREAT!! Thank you so much for that manual. I have been looking all over the internet for that.. I don't know hwy they don't ship it with the DVR