kostas125 0 Posted July 2, 2016 Hello everyone!! I am looking for an rtsp stream that includes all cameras in same window. I know that each channel has his own rtsp url but im looking for a url that is streaming all cams together in order to capture them at once . Is that possible?? Thanks! Share this post Link to post Share on other sites
phydeaux 0 Posted July 5, 2016 Anyone using the URCCTV (ANTS) Premium Desktop Design Onvif NVR 4CH, 9CH,16CH for 2MP, 3MP, 5MP Onvif IP Cameras with QR Scan Remote Mobile App. Model series N6200- EX ? How is it Performing ? Internal HDD ? Issues? Cameras that you have working ? Looking at Camera Options besides the ones from URCCTV for Outdoor. (Not needing any inside Cameras) Looking at the 9 Channel N6200-9EX Item specifics Technology: Network Build-in HDD: None Two-way Audio: No Video Input Interface: HDMI Hard Drive Size: 2.5'' Hard drive Interface Type: SATA Power Source: EU Backup Type: USB Flash Divers Audio Input: 4 Channel,16 Channel Supported Mobile Systems: iPhone OS Network Interface: RJ45 10/100M Alarm Action: Local Alarm Audio Output: None Video Output: 1CH HDMI 1920X1080 60Hz Video Resolution: 5MP Supported Operating Systems: Microsoft Windows 7 Model Number: N6200-4EX,9EX,16EX IP Camera Support : Onvif Protocol (Motion detection not work with third Party Cameras) Display: VGA/HDMI/PC Operating: USB Mouse (Not Included) Mobile Remote View App: Goolink/CCTVP2P Preview: Sub-Stream (Grid) / Main Stream (Single CH) Recording: Main-Stream or Sub-Stream Optional Max Channel Playback at the Same time: 4EX(4CH 3MP); 9EX(9CH 960P);16EX(8CH 960P) Backup: USB Flash Drive, IE Recording Harddrive Support: 2.5" SATA HDD; E-SATA HDD (HDD Not Included Share this post Link to post Share on other sites
andreaseco 0 Posted July 5, 2016 Hi guys, I have a strange issue with the mini nvr 16 channel (N6200 16EH). I'm running on latest firmware 20151231 with the goolink patch. Everything works perfect.... for 2-3 days then a few things happen: 1. I cannot watch the mobile stream (IP cam viewer on Android) 2. I cannot ping the nvr from network or access from Internet Explorer or telnet 3. NVR is working fine from HDMI (recording viewing) If I reboot everything is working normal. I was forced to enable auto-reboot every 2 days... It's a temporary solution.... Someone knows something to share ? update: Must be a firmware issue cause I used mini 8ch with firmware 201503---- on the same network and it doesn't go down. Share this post Link to post Share on other sites
matheusriserio 0 Posted July 8, 2016 I have a mini nvr N6200 of 16 channels , and can not connect the HDD in it. Already formatted in fat32 yet he does not identify , what I do? It would be a defect in the firmware version ? Share this post Link to post Share on other sites
phydeaux 0 Posted July 8, 2016 I have a mini nvr N6200 of 16 channels , and can not connect the HDD in it.Already formatted in fat32 yet he does not identify , what I do? It would be a defect in the firmware version ? Which Model Number do you have of the N6200 ? (N6200-???) Internal OR Externall HDD ? I'm no expert (far from it on security Camera Systems), I might be wrong but I believe you have to FORMAT the hard Drive through the NVR operating System (it uses a different format than FAT) Hopefully Someone with more experience will have more information. Share this post Link to post Share on other sites
sn37 0 Posted July 9, 2016 What happend to goolink.org (Anycam) website? why I cannot Login? Has anybody tried? br Share this post Link to post Share on other sites
lucktom 0 Posted July 11, 2016 Cycle recording problem. Hello. I own the generic N6200-8EL NVR (no brand) with the 20151231_Firmware. It seems to work correctly but the setting menu lacks the "record replace" and "record time (hours)" items. These 2 options are not displayed. So when my (internal) hdd is full, the record stops and I can't overwrite/cycle the record. It seems that it is a matter of firmwmare, as the old 20140417 firmware showed that options. See steph2a answer http://www.cctvforum.com/viewtopic.php?t=39628&start=525 I hesitate to downgrade to the old firmware, because I am afraid of bricking the nvr, and I am not sure of the integrity of the 20140417 firmware that I have downloaded. Would someone have a solution? Thx Share this post Link to post Share on other sites
400400 0 Posted July 13, 2016 Hi My version is V4.0 20150808 - problem If I set the motion detection recording starts but dont stop recording when motion stops He's recording always /nonstop/ - motion detection not remember setting sensitivity i have this camera http://www.ebay.com/itm/P2P-HD-1080P-2MP-IP-Camera-Network-Onvif-CCTV-Outdoor-Security-36IR-Night-Vision-/161452784090?hash=item259755f9da:g:CRsAAMXQ74JTTeYY thanks Share this post Link to post Share on other sites
tranceinsane 0 Posted July 15, 2016 HiMy version is V4.0 20150808 - problem If I set the motion detection recording starts but dont stop recording when motion stops He's recording always /nonstop/ - motion detection not remember setting sensitivity i have this camera http://www.ebay.com/itm/P2P-HD-1080P-2MP-IP-Camera-Network-Onvif-CCTV-Outdoor-Security-36IR-Night-Vision-/161452784090?hash=item259755f9da:g:CRsAAMXQ74JTTeYY thanks Hi, I am looking for the NVR firmware version V4.0 20150808 for my VC-N6200-8EL and saw you have the same (I updated mine to 31.12.2015 and want to downgrade). Is there any way you can download/save your firmware and send it to me (freonstar@gmail.com)? Would be thankful to you for that. Share this post Link to post Share on other sites
redders 0 Posted July 16, 2016 I'm having a similar issue as you, With the same hardware but software version V4.0[20151231] The network appears to stop functioning after a couple of days and I have to reboot. I've also set a daily reboot as a work around. Hi guys, I have a strange issue with the mini nvr 16 channel (N6200 16EH). I'm running on latest firmware 20151231 with the goolink patch. Everything works perfect.... for 2-3 days then a few things happen: 1. I cannot watch the mobile stream (IP cam viewer on Android) 2. I cannot ping the nvr from network or access from Internet Explorer or telnet 3. NVR is working fine from HDMI (recording viewing) If I reboot everything is working normal. I was forced to enable auto-reboot every 2 days... It's a temporary solution.... Someone knows something to share ? update: Must be a firmware issue cause I used mini 8ch with firmware 201503---- on the same network and it doesn't go down. Share this post Link to post Share on other sites
CharlieB 0 Posted July 19, 2016 Firmware you are after is available here http://www.unitoptek.com/?article=detail&id=133 Share this post Link to post Share on other sites
henkie83 0 Posted July 25, 2016 Okay so i have read some of the pages but not all of them because there are 80 of them So i have this small setup with 1 x NVR N6200:8E and 2x camera's they both are discovered OK by the NVR and the display is good. I thought i would then stream/record all the video data to a SMB share of a NAS so without buying an extra HDD or plugging something in via USB or eSATA. I have done some googline but i cant really find anything about it. It only says that when attaching a HDD it will format it to its own structure resulting in data loss. So does anyone know if it is possible to stream all the video data directly to a NAS or does there have to be a HDD attached to the NVR physically ? Any advice on firmware upgrade ? Master version V4.0[20150808] Hardware V4.0 Share this post Link to post Share on other sites
lesterb 0 Posted July 25, 2016 You have to save to a HDD attached to the device. The following list is from the quick start guide. The product supports external HDD only, including mobile HDD, hard-disk cartridge with E-SATA port. We have tested following HDD brands and model numbers work with the mini NVR: Seagate Backup Plus 1TB 2.5’’ USB3.0 mobile HDD, Model No.: STBU1000300 Seagate Expansion 1TB 2.5’’ USB3.0 mobile HDD, Model No.: STBX1000301 Seagate Expansion 2TB 3.5’’ USB3.0 external HDD, Model No.: STBV2000300 Western Digital (WD) Elements 1TB 2.5’’ USB3.0 mobile HDD, Model No.: WDBUZG0010BBK Once you have it working try to backup to a HDD elsewhere. I can't get it to work. If you do, let me know how. Share this post Link to post Share on other sites
henkie83 0 Posted July 26, 2016 You have to save to a HDD attached to the device. The following list is from the quick start guide. The product supports external HDD only, including mobile HDD, hard-disk cartridge with E-SATA port. We have tested following HDD brands and model numbers work with the mini NVR: Seagate Backup Plus 1TB 2.5’’ USB3.0 mobile HDD, Model No.: STBU1000300 Seagate Expansion 1TB 2.5’’ USB3.0 mobile HDD, Model No.: STBX1000301 Seagate Expansion 2TB 3.5’’ USB3.0 external HDD, Model No.: STBV2000300 Western Digital (WD) Elements 1TB 2.5’’ USB3.0 mobile HDD, Model No.: WDBUZG0010BBK Once you have it working try to backup to a HDD elsewhere. I can't get it to work. If you do, let me know how. OK thanks for the info pretty sad though. I can HTTP directly to one of the camera's and just put in a network share \\"IP"\"Video folder" and it works but then you have to keep the window open the whole time :'( Share this post Link to post Share on other sites
redders 0 Posted August 7, 2016 Hi all, Hope someone can help. I updated to the latest firmware N6200-4EH/9EH/16EH_20151231_Firmware But since doing so the system locks up on a daily basis. So I went to downgrade it back to the previous FW update.3535.a.web.all.6200_4.9.16ch.update but when the system rebooted it stuck at the screen logo “Network Video Recorder” I have tried downloading the files to create a boot usb but the NVR2 still only boots to the logo screen. Can anyone advise how I might be able to recover my bricked NVR2? Thanks Dave Share this post Link to post Share on other sites
lesterb 0 Posted August 8, 2016 I have and N6800-8E and have never been able backup recorded video through IE in ActiveX mode. I emailed Escam support and they sent me an update "update.3520d.a.web.all.nor.4_0_2016060718.mini.8ch.update" plus "dvr.update". When use IE in ActiveX mode after the update it installed a new version of rtspvideoplugin but I could no longer view my cameras in IE ActiveX mode but I could in Non ActiveX mode. I've uninstalled new rtspvideoplugin and installed the previous version of the firmware and when I connect via IE in ActiveX mode for the first time it installs the earlier rtspvideopluging but I still can't view my cameras in ActiveX mode. There must be something else installed that affects this. What do I need to remove to get back to a clean system? Escam support haven't replied since I reported this problem. Share this post Link to post Share on other sites
CharlieB 0 Posted August 20, 2016 new firmware finally available at... http://www.urcctvstore.com/Download.html Share this post Link to post Share on other sites
Szymon_Zy 0 Posted August 20, 2016 Sure ... i have just bricked device. No VGA output at all. Restart every 1 minute. Ping reply but i got only onece for a while access to login screen. I had N6200-8E. Share this post Link to post Share on other sites
Szymon_Zy 0 Posted August 20, 2016 i got into ssh ant runing ants_dvr makes segmentation fault ....... dmesg go like that: Linux version 3.0.8 (root@sqy-desktop) (gcc version 4.4.1 (Hisilicon_v100(gcc4.4-290+uclibc_0.9.32.1+eabi+linuxpthread)) ) #82 Fri Oct 17 16:28:21 CST 2014 CPU: ARMv7 Processor [414fc091] revision 1 (ARMv7), cr=10c53c7f CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache Machine: hi3520d Memory policy: ECC disabled, Data cache writeback On node 0 totalpages: 37632 free_area_init_node: node 0, pgdat c03cb448, node_mem_map c0419000 Normal zone: 294 pages used for memmap Normal zone: 0 pages reserved Normal zone: 37338 pages, LIFO batch:7 pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 pcpu-alloc: [0] 0 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 37338 Kernel command line: mem=147M console=ttyAMA0,115200 root=/dev/mtdblock2 rootfstype=squashfs mtdparts=hi_sfc:320K(uboot),1536K(kernel),4M(rfs),25792K(app),768K(config),256K(logo) PID hash table entries: 1024 (order: 0, 4096 bytes) Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) Memory: 147MB = 147MB total Memory: 144904k/144904k available, 5624k reserved, 0K highmem Virtual kernel memory layout: vector : 0xffff0000 - 0xffff1000 ( 4 kB) fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) DMA : 0xffc00000 - 0xffe00000 ( 2 MB) vmalloc : 0xc9800000 - 0xfe000000 ( 840 MB) lowmem : 0xc0000000 - 0xc9300000 ( 147 MB) modules : 0xbf000000 - 0xc0000000 ( 16 MB) .init : 0xc0008000 - 0xc0023000 ( 108 kB) .text : 0xc0023000 - 0xc03b0000 (3636 kB) .data : 0xc03b0000 - 0xc03cbac0 ( 111 kB) .bss : 0xc03cbae4 - 0xc0418020 ( 306 kB) SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 NR_IRQS:128 nr_irqs:128 128 sched_clock: 32 bits at 82MHz, resolution 12ns, wraps every 52060ms Console: colour dummy device 80x30 Calibrating delay loop... 1318.91 BogoMIPS (lpj=6594560) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 512 CPU: Testing write buffer coherency: ok NET: Registered protocol family 16 Serial: AMBA PL011 UART driver uart:0: ttyAMA0 at MMIO 0x20080000 (irq = 40) is a PL011 rev2 console [ttyAMA0] enabled uart:1: ttyAMA1 at MMIO 0x20090000 (irq = 41) is a PL011 rev2 uart:2: ttyAMA2 at MMIO 0x200a0000 (irq = 42) is a PL011 rev2 bio: create slab <bio-0> at 0 SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb cfg80211: Calling CRDA to update world regulatory domain Switching to clocksource timer1 NET: Registered protocol family 2 IP route cache hash table entries: 2048 (order: 1, 8192 bytes) TCP established hash table entries: 8192 (order: 4, 65536 bytes) TCP bind hash table entries: 8192 (order: 3, 32768 bytes) TCP: Hash tables configured (established 8192 bind 8192) TCP reno registered UDP hash table entries: 256 (order: 0, 4096 bytes) UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) NET: Registered protocol family 1 NetWinder Floating Point Emulator V0.97 (double precision) L2cache cache controller enabled VFS: Disk quotas dquot_6.5.2 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) squashfs: version 4.0 (2009/01/31) Phillip Lougher JFFS2 version 2.2. (NAND) Š 2001-2006 Red Hat, Inc. fuse init (API version 7.16) msgmni has been set to 283 encryption fail no ack sha204_sn is 1 sha204_sn is 23 sha204_sn is 5a sha204_sn is 85 sha204_sn is 92 sha204_sn is 7b sha204_sn is 48 sha204_sn is bc sha204_sn is ee no ack count is 255 no ack no ack no ack no ack no ack count is 255 no ack no ack no ack no ack no ack count is 255 no ack no ack no ack no ack no ack count is 255 no ack no ack no ack no ack no ack count is 255 no ack no ack no ack no ack no ack count is 255 no ack no ack count is 15 no ack sha204_devinfo is 11 i is 0 g_sha204_delay_time is 20 sha204_sn is 1 sha204_sn is 23 sha204_sn is 5a sha204_sn is 85 sha204_sn is 92 sha204_sn is 7b sha204_sn is 48 sha204_sn is bc sha204_sn is ee sha204_devinfo is 44 i is 0 sha204_devinfo is 56 i is 1 sha204_devinfo is 52 i is 2 sha204_devinfo is 32 i is 3 sha204_devinfo is 33 i is 4 sha204_devinfo is 35 i is 5 sha204_devinfo is 31 i is 6 sha204_devinfo is 35 i is 7 sha204_devinfo is 30 i is 8 sha204_devinfo is 34 i is 9 sha204_devinfo is 1 i is 10 sha204_devinfo is 53 i is 11 sha204_devinfo is 0 i is 12 sha204_devinfo is 0 i is 13 sha204_devinfo is 0 i is 14 sha204_devinfo is 0 i is 15 TempKey is e8 TempKey is af TempKey is e8 TempKey is 5b TempKey is d TempKey is 20 TempKey is 6b TempKey is a8 TempKey is 57 TempKey is 5c TempKey is 38 TempKey is 15 TempKey is e2 TempKey is 6d TempKey is ea TempKey is ea TempKey is 1e TempKey is 37 TempKey is 84 TempKey is a2 TempKey is 6f TempKey is fc TempKey is 64 TempKey is 8b TempKey is 23 TempKey is 0 TempKey is f6 TempKey is 59 TempKey is 98 TempKey is ca TempKey is 47 TempKey is aa encryption ok Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) io scheduler noop registered io scheduler deadline registered (default) io scheduler cfq registered brd: module loaded loop: module loaded ahci: SSS flag set, parallel bus scan disabled ahci ahci.0: AHCI 0001.0200 32 slots 2 ports 3 Gbps 0x3 impl platform mode ahci ahci.0: flags: ncq sntf stag pm led clo only pmp pio slum part ccc sxs boh scsi0 : ahci_platform scsi1 : ahci_platform ata1: SATA max UDMA/133 mmio [mem 0x10080000-0x1008ffff] port 0x100 irq 52 ata2: SATA max UDMA/133 mmio [mem 0x10080000-0x1008ffff] port 0x180 irq 52 Spi id table Version 1.22 Hisilicon Spi Flash Controller V350 Device Driver, Version 1.10 Spi(cs1) ID: 0x01 0x02 0x19 0x4D 0x01 0x80 SPI FLASH start_up_mode is 3 Bytes Spi(cs1): Block:64KB Chip:32MB Name:"S25FL256S" spi size: 0x33554432 chip num: 1 6 cmdlinepart partitions found on MTD device hi_sfc Creating 6 MTD partitions on "hi_sfc": 0x000000000000-0x000000050000 : "uboot" 0x000000050000-0x0000001d0000 : "kernel" 0x0000001d0000-0x0000005d0000 : "rfs" 0x0000005d0000-0x000001f00000 : "app" 0x000001f00000-0x000001fc0000 : "config" 0x000001fc0000-0x000002000000 : "logo" Fixed MDIO Bus: probed ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: ATA-9: WDC WD7500BFCX-68N6GN0, 82.00A82, max UDMA/133 ata1.00: 1465149168 sectors, multi 0: LBA48 NCQ (depth 31/32) ata1.00: configured for UDMA/133 scsi 0:0:0:0: Direct-Access ATA WDC WD7500BFCX-6 82.0 PQ: 0 ANSI: 5 scsi 0:0:0:0: Attached scsi generic sg0 type 0 himii: probed Invalid HW-MAC Address: 00:00:00:00:00:00 Set Random MAC address: B6:58:0F:D2:EF:10 ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver hiusb-ehci hiusb-ehci.0: HIUSB EHCI hiusb-ehci hiusb-ehci.0: new USB bus registered, assigned bus number 1 hiusb-ehci hiusb-ehci.0: irq 53, io mem 0x100b0000 hiusb-ehci hiusb-ehci.0: USB 0.0 started, EHCI 1.00 hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver hiusb-ohci hiusb-ohci.0: HIUSB OHCI hiusb-ohci hiusb-ohci.0: new USB bus registered, assigned bus number 2 hiusb-ohci hiusb-ohci.0: irq 54, io mem 0x100a0000 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected usbcore: registered new interface driver cdc_wdm Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. ata2: SATA link down (SStatus 0 SControl 300) usbcore: registered new interface driver usbserial usbserial: USB Serial Driver core mousedev: PS/2 mouse device common for all mice usbcore: registered new interface driver usbhid usbhid: USB HID core driver TCP cubic registered NET: Registered protocol family 17 Registering the dns_resolver key type registered taskstats version 1 VFS: Mounted root (squashfs filesystem) readonly on device 31:2. Freeing init memory: 108K udevd (492): /proc/492/oom_adj is deprecated, please use /proc/492/oom_score_adj instead. Hisilicon Media Memory Zone Manager hi3520D_base: module license 'Proprietary' taints kernel. Disabling lock debugging due to kernel taint Hisilicon UMAP device driver interface: v3.00 load sys.ko ...OK! Load tde.ko ...OK! load venc.ko ...OK! load group.ko ...OK! load chnl.ko ...OK! load h264e.ko ...OK! load rc.ko ...OK! load jpege.ko ...OK! load viu.ko ...OK! load vou.ko ....OK! load vpss.ko ....OK! load vda.ko ....OK! load region.ko ....OK! load vdec.ko ....OK load vhd firmware.ko OK load hdmi.ko ....OK! Load hi_jpegdec.ko success. (SDK_VERSION:[SDK_VERSION] Build Time:[Apr 15 2015, 20:12:57]) HISI_IRDA-MF @Hi3520Dv100R00 hiir: init ok. ver=Nov 26 2013, 15:14:13. sd 0:0:0:0: [sda] 1465149168 512-byte logical blocks: (750 GB/698 GiB) sd 0:0:0:0: [sda] 4096-byte physical blocks sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 < sda5 > sd 0:0:0:0: [sda] Attached SCSI disk USB Serial support registered for GSM modem (1-port) usbcore: registered new interface driver option option: v0.7.2:USB Driver for GSM modems rtusb init rt2870 ---> usbcore: registered new interface driver rt2870 PPP generic driver version 2.4.2 PHY: himii:03 - Link is Up - 100/Full JFFS2 warning: (497) jffs2_do_read_inode_internal: Truncating ino #261 to 1580542 bytes failed because it only had 679936 bytes to start with! EXT3-fs: barriers not enabled kjournald starting. Commit interval 5 seconds EXT3-fs (sda1): using internal journal EXT3-fs (sda1): mounted filesystem with ordered data mode [GPIO] GPIOGET_WATCHDOG Enable chardata = 1!!! ***link down status changed***. PHY: himii:03 - Link is Down PHY: himii:03 - Link is Up - 100/Full # running ants_dvr: # ants_dvr begin dvr////////////////////////////////////////////////////////////// argc 1, argv ants_dvr g_iDevType 153 open /usr/etc/mycfg.xml open /root/res_xml/Keyboard.xml DBG[embedded/qscreenlinuxfb_qws.cpp connectĄĄ350] QLinuxFbScreen::connect :0 DBG[embedded/qscreenlinuxfb_qws.cpp connectĄĄ379] open /dev/fb0 DBG[embedded/qscreenlinuxfb_qws.cpp connectĄĄ397] open device /dev/fb0 success DBG[embedded/qscreenlinuxfb_qws.cpp connectĄĄ425] open /usr/etc/mycfg.xml open /root/DeviceDisplay.xml DBG[embedded/qscreenlinuxfb_qws.cpp getScreenInfoĄĄ307] file doesn't exists DBG[embedded/qscreenlinuxfb_qws.cpp connectĄĄ469] vinfo.xres 1024 768 DBG[embedded/qscreenlinuxfb_qws.cpp connectĄĄ481] d_ptr->fd 8 vinfo xres 1024, xres_virtual1024 DBG[embedded/qscreenlinuxfb_qws.cpp connectĄĄ513] screen vinfo bits_per_pixel 16 r g b 5 5 5 d = 15 finfo.line_length 2048 DBG[embedded/qscreenlinuxfb_qws.cpp connectĄĄ554] dw is 1024,dh is 768 lstep 2048 DBG[embedded/qscreenlinuxfb_qws.cpp connectĄĄ600] mmap fb0 : d_ptr->fd 8, data 1089155072, mapsize 4300800 open /usr/etc/mycfg.xml open /root/res/language_English.qm open /root/res/LanguageInfo.xml open /root/res/default.qss erro[antsMainDlg.cpp signalHandlerĄĄ1279] signo 11 open /usr/etc/myExceptionState.xml open /usr/etc/myExceptionState.xml open /usr/etc/myExceptionInfo.data ################################ stack dump iStack [becb79b4] = 40e25998 object:/lib/libc.so.0 0x40e19000 symbol:__default_sa_restorer [0x40e25998+0x0] iStack [becb79b8] = 5ac3c35a object:/lib/libc.so.0 0x40e19000 symbol: [0x0+0x5ac3c35a] iStack [becb79bc] = 182a630 object:ants_dvr 0x8000 symbol: [0x0+0x182a630] iStack [becb79c0] = 40ead0a8 object:/lib/libc.so.0 0x40e19000 symbol:__malloc_lock [0x40ead0a8+0x0] iStack [becb79c4] = cd78cddf object:/lib/libc.so.0 0x40e19000 symbol: [0x0+0xcd78cddf] iStack [becb79c8] = cd78cddf object:/lib/libc.so.0 0x40e19000 symbol: [0x0+0xcd78cddf] iStack [becb79cc] = e iStack [becb79d0] = 17 iStack [becb79d4] = 0 iStack [becb79d8] = becb8704 object:/lib/libc.so.0 0x40e19000 symbol: [0x0+0xbecb8704] iStack [becb79dc] = 7198 iStack [becb79e0] = e9975c object:ants_dvr 0x8000 symbol: [0x0+0xe9975c] iStack [becb79e4] = e925c4 object:ants_dvr 0x8000 symbol: [0x0+0xe925c4] iStack [becb79e8] = 0 iStack [becb79ec] = 182b950 object:ants_dvr 0x8000 symbol: [0x0+0x182b950] iStack [becb79f0] = ffff0fc0 object:/lib/libc.so.0 0x40e19000 symbol: [0x0+0xffff0fc0] iStack [becb79f4] = becb870c object:/lib/libc.so.0 0x40e19000 symbol: [0x0+0xbecb870c] iStack [becb79f8] = becb86b0 object:/lib/libc.so.0 0x40e19000 symbol: [0x0+0xbecb86b0] iStack [becb79fc] = becb8770 object:/lib/libc.so.0 0x40e19000 symbol: [0x0+0xbecb8770] iStack [becb7a00] = becb7ccc object:/lib/libc.so.0 0x40e19000 symbol: [0x0+0xbecb7ccc] iStack [becb7a04] = becb8710 object:/lib/libc.so.0 0x40e19000 symbol: [0x0+0xbecb8710] iStack [becb7a08] = e8fa48 object:ants_dvr 0x8000 symbol: [0x0+0xe8fa48] iStack [becb7a0c] = becb7ca8 object:/lib/libc.so.0 0x40e19000 symbol: [0x0+0xbecb7ca8] iStack [becb7a10] = 1e148 object:ants_dvr 0x8000 symbol: [0x0+0x1e148] iStack [becb7a14] = 2049a0 object:ants_dvr 0x8000 symbol: [0x0+0x2049a0] iStack [becb7a18] = 20000010 object:ants_dvr 0x8000 symbol: [0x0+0x20000010] iStack [becb7a1c] = d0 iStack [becb7a20] = 0 iStack [becb7a24] = 0 iStack [becb7a28] = becb7a78 object:/lib/libc.so.0 0x40e19000 symbol: [0x0+0xbecb7a78] ............ iStack [becb7ca0] = ffff0fc0 object:/lib/libc.so.0 0x40e19000 symbol: [0x0+0xffff0fc0] iStack [becb7ca4] = becb870c object:/lib/libc.so.0 0x40e19000 symbol: [0x0+0xbecb870c] iStack [becb7ca8] = becb8704 object:/lib/libc.so.0 0x40e19000 symbol: [0x0+0xbecb8704] iStack [becb7cac] = 1e148 object:ants_dvr 0x8000 symbol: [0x0+0x1e148] iStack [becb7cb0] = becb8774 object:/lib/libc.so.0 0x40e19000 symbol: [0x0+0xbecb8774] iStack [becb7cb4] = 40054000 object:/lib/libgcc_s.so.1 0x4003e000 symbol: [0x0+0x40054000] iStack [becb7cb8] = 40ead0a8 object:/lib/libc.so.0 0x40e19000 symbol:__malloc_lock [0x40ead0a8+0x0] iStack [becb7cbc] = becb85a4 object:/lib/libc.so.0 0x40e19000 symbol: [0x0+0xbecb85a4] iStack [becb7cc0] = becb876c object:/lib/libc.so.0 0x40e19000 symbol: [0x0+0xbecb876c] iStack [becb7cc4] = becb8728 object:/lib/libc.so.0 0x40e19000 symbol: [0x0+0xbecb8728] iStack [becb7cc8] = cd78cddf object:/lib/libc.so.0 0x40e19000 symbol: [0x0+0xcd78cddf] iStack [becb7ccc] = 182b850 object:ants_dvr 0x8000 symbol: [0x0+0x182b850] iStack [becb7cd0] = 6f6f722f object:/lib/libc.so.0 0x40e19000 symbol: [0x0+0x6f6f722f] iStack [becb7cd4] = 65722f74 object:/lib/libc.so.0 0x40e19000 symbol: [0x0+0x65722f74] iStack [becb7cd8] = 614c2f73 object:/lib/libc.so.0 0x40e19000 symbol: [0x0+0x614c2f73] iStack [becb7cdc] = 6175676e object:/lib/libc.so.0 0x40e19000 symbol: [0x0+0x6175676e] iStack [becb7ce0] = 6e496567 object:/lib/libc.so.0 0x40e19000 symbol: [0x0+0x6e496567] iStack [becb7ce4] = 782e6f66 object:/lib/libc.so.0 0x40e19000 symbol: [0x0+0x782e6f66] iStack [becb7ce8] = 6c6d iStack [becb7cec] = 0 iStack [becb7cf0] = 0 signo 11=SIGSEGV :Segmentation fault ########################### 2016-08-20_12:56:39 Segmentation fault Share this post Link to post Share on other sites
Szymon_Zy 0 Posted August 24, 2016 My USB on NVR is dead I had to recover by coping telnet recover files to hdd with esata cable and plug hdd after whole device start up. Now i have 2014 firmware. What is proper path to get to the newest? Share this post Link to post Share on other sites
markc_uk 0 Posted August 25, 2016 Updated my 6200-4e to the latest firmware but now I have lost video output on both HDMI and VGA. I've tried going back to 20150808 firmware with USB boot (which has installed fine), but again, no HDMI or VGA video outputs. Any ideas anyone? Share this post Link to post Share on other sites
CharlieB 0 Posted August 25, 2016 same issue all outputs dead Share this post Link to post Share on other sites
lesterb 0 Posted August 25, 2016 same issue all outputs dead Is this update, 20160707_0153_mini_8ch_A.update, the one that is giving trouble with video output? Has anyone installed it successfully? Share this post Link to post Share on other sites
Szymon_Zy 0 Posted August 25, 2016 After some troubles i did. I don't see anything new. Share this post Link to post Share on other sites
markc_uk 0 Posted August 26, 2016 After some troubles i did. I don't see anything new. Hi Szymon. With this update, do you still have either HDMI and/or VGA outputs working? How did you finally install correctly? Thanks. Share this post Link to post Share on other sites
